Changes between Version 132 and Version 133 of UserGuideGit

Timestamp:

Feb 16, 2009, 3:37:02 PM (16 years ago)

Author:

Frédéric

Comment:

--

UserGuideGit

@@ -211 +211 @@
  * '''Head orientation''': orientation of the head
  * '''Camera orientation''': camera orientation on the head (if combobox is set to ''custom'', real orientation can be given)
- * '''Stab. delay''': delay to wait after the head has stopped, and before shooting, to let the head stablizing
+ * '''Stabilization delay''': delay to wait after the head has stopped, and before shooting, to let the head stablizing
 
 ==== Mosaic tab ====
@@ -223 +223 @@
 
  * '''Time value''': shooting time. If set to 0, skip shooting sequence
- * '''Mirror lockup''': if set, trigger an additionnal shutter sequence before each shot
- * '''Pulse width (high/low)''': width of the shutter triggering pulse (value for high level, and minimum value for low level)
+ * '''Pulse width (high/low)''': width of the shutter triggering pulse (high level duration, and minimum low level duration between too consecutive shots)
  * '''Bracketing''': number of picture to take at each position, and the intent of the bracketing
- * '''Sensor (coef/ratio/res)''': ratio to 24x36 size, width vs height ratio and resolution of the sensor
+ * '''Sensor (coef/ratio)''': ratio to 24x36 size, width vs height ratio
+ * '''Sensor resolution''': resolution of the sensor
 
 ==== Lens tab ====
@@ -232 +232 @@
  * '''Type''': type of the lens (''rectilinear'' or ''fisheye'')
  * '''Focal''': real focal of the lens (''rectilinear'' only)
- * '''Multiplier''': optional optical multiplier coef. (''rectilinear'' only). Not yet implemented
+ * '''Optical multiplier''': optional optical multiplier coef. (''rectilinear'' only)
 
 ==== Hardware tab ====
@@ -238 +238 @@
  * '''Driver''': hardware driver to use ('bluetooth', 'serial', 'ethernet')
  * '''BT device address''': bluetooth device address for 'bluetooth' driver
- * '''Choose...''': open the bluetooth choose window
+ * '''Choose...''': open the bluetooth chooser dialog
  * '''Serial port''': serial device port for 'serial' driver (either a int or a string, like {{{COM1}}} or {{{/dev/ttyS0}}})
- * '''ethernet host''': hostname/IP for the 'ethernet' driver
- * '''ethernet port''': port number of the 'ethernet' driver
+ * '''Ethernet host''': hostname/IP for the 'ethernet' driver
+ * '''Ethernet port''': port number of the 'ethernet' driver
  * '''Auto-connect''': if set, try to automatically connect to the head at startup
 
@@ -259 +259 @@
 ==== Timer tab ====
 
- * '''Start after''': time delay to wait before starting
- * '''Enable''': switch to enable the previous timer
+ * '''Start after''': delay to wait before starting
+ * '''Enable''': switch to enable the '''Start after''' timer
  * '''Repeat''': number of repeats
- * '''Enable''': switch to enable the previous timer
- * '''Repeat every''': timer value to shoot panos at regular elapsed time
+ * '''Enable''': switch to enable the '''Repeat''' feature
+ * '''Repeat every''': shoot panos every given time
 
 ==== Misc tab ====
@@ -286 +286 @@
  * ''sequence'': display the current shooting sequence
  * ''repeat counter'': display the current repeat value
+ * ''elapsed time'': display the shooting time and total elapsed time
  * ''progress bar'': shooting process progression (for current repeat and all repeats)
 
@@ -299 +300 @@
  * '''Pause/Resume/Step''': pause/resume/step shooting process
  * '''Stop''': cancel shooting process
- * '''Done''': close shooting dialog
+ * '''Close''': close shooting dialog
 
 === Log dialog ===