Papywizard User Guide (subversion)

• Usage overview
• Advanced usage
  • Mosaic mode
  • Preset mode
    • Custom presets
    • Preset converter
• Reference manual
  • Main window
  • Configuration dialog
  • Bluetooth dialog
  • Shoot dialog
  • General info dialog
  • Log dialog
• Keyboard shortcuts

This documentation try to follow the developpement version of Papywizard. It may or may not be up-to-date ;o)

For installation instructions, see here.

Usage overview

Papywizard is very easy to use, and I hope the GUI is intuitive enough.

The first thing to do is to edit the configuration, to reflect you camera/lens/head/hardware config. Basic settings are the delay to wait after moving (to let the head stop shaking), the delay to wait while shooting (camera Tv value), and the number of pictures to take at each position (bracketing). See below for specific mode settings.

Second, you need to connect to the hardware (Menu Hardware > Connect). If you use the bluetooth driver (default config), you need to enter the correct address of your adapter. Alternatively, you can get a list of all available bluetooth devices arround, and select the correct one.

Then, just move the head either using the big GUI arrows, or using the keys shortcuts (see below), and set the start/end positions.

Once it is done, just open the shooting dialog and launch the entire process. That's it!

Advanced usage

Papywizard has now 2 modes: Mosaic mode, and Preset mode. The first one is mainly used for partial panos, and is especially designed for hi-res panos, using a large tele-lens. The second one is designed for full-spherical panos, using a wide-lens or a fisheye.

Mosaic mode

The mosaic mode computations are based on the following parameters:

• minimum overlap
• camera orientation
• sensor coef. and ratio
• focal lens

So, these settings must exactly reflect your configuration.

This mode also needs to know start/end positions, which are two opposite corners of the pano you want to shoot. There are 3 ways to give these positions:

• set them from the current position
• give the total field of view for both directions; start/end positions will be automatically computed arround the Home position (yaw=0, pitch=0)
• give the number of pictures to take for both directions; start/end positions will also be automatically computed arround the Home position (yaw=0, pitch=0)

It does not matter which corner you use for start or end, but it will influence the direction the pano will be shot. Note that, depending of the settings, Papywizard can start shooting from the start position, or from the end position. This is usefull to avoid the head to go back to the opposite corner before shooting (which takes time and uses batteries).

It is also possible to choose the initial shooting direction. Using yaw will shoot row by row; using pitch will shoot column by column. Same, the head can go back to the begining of the row/column before shooting the next one (see Tips and tricks).

Preset mode

This mode is very simple, and does not use any particular settings; it just shoots at all positions defined in the selected template. The only thing to do is to define the home position of the head (origin), which will be the reference for the template positions. In case the camera/lens can't be moved in all positions, it is possible to set some limits, to avoid potential colisions (limits are not saved in the current release, so they must be set each time the head is turned on).

Custom presets

Some default presets are provided with the software, but it is possible to add your own. For that, you need to create a xml file which describes them. The file must be named presets.xml and must be in ~/.config/papywizard/ on linux, /home/user/.config/papywizard/ on maemo, and C:\Documents and settings\<user>\Application Data\papywizard\ on Windows.

Here is the file structure:

<?xml version="1.0" encoding="utf-8" ?>
<papywizard>
    <preset name="My custom preset">
        <tooltip>
            20D + 50mm
            12 picts @ +55°
            20 picts @ +40°
            50 picts @  10°/-10°
            20 picts @ -40°
            55 picts @ -70°
        </tooltip>
        <shoot>
            <pict yaw="0." pitch="55." />
            <pict yaw="30." pitch="55." />
            <pict yaw="60." pitch="55." />
            <pict yaw="90." pitch="55." />
            ...
        </shoot>
    </preset>
    <preset name="Another custom preset">
    ....
     </preset>
</papywizard>

Where:

• <preset> name attribute: name used to present the preset in the GUI
• <tooltip>: information for that preset (shown in the information presets template window)
• <shoot>: list of all positions to shoot, described in yaw/pitch attributes of the <pict> tag (one tag per position)

To save time during shoot, take care of the order of positions. For example, don't ask the head to go back to the begining of the new row, it will take too long; instead, reverse the direction and go back for the next row.

You can also import a custom preset file from the File menu. Note that this file won't be automatically loaded at next startup; this is mainly to test your presets before putting them in your user config. dir.

If you add usefull templates, feel free to send them so they could be added as default ones.

Preset converter

As all files managed by Papywizard are xml, it is very easy to convert an output data file to a presets.xml file, using XSL transofrm. Here is a a form to automatically make such conversion.

Reference manual

Main window

Menus

• File > Quit: exit from Papywizard
• File > Import Preset File...: import presets from file
• Hardware > Connect: connect to the head hardware
• Hardware > Set limit...: set the selected limit to curent position
• Hardware > Clear limits: reset all limits
• Hardware > Reset: reset the head hardware
• Help > Manual: open this documentation (network connection needed)
• Help > View log...: open log window
• Help > About: show the about dialog

displays

Mosaic mode:

• Start: start shooting position
• End: end shooting position
• Total Fov: total shooting field of view
• Nb picts: shooting number of pictures
• Real overlap: real shooting overlap

Preset mode:

• Template:

All modes:

• Position: current position of the head

buttons

• Mosaic/Preset: switch between mosaic and preset mode

Mosaic mode:

• Start/Yaw/Pitch: set the start shooting position from current position (for both, yaw or pitch)
• End/Yaw/Pitch: set the end shooting position from current position (for both, yaw or pitch)
• Total fov: open a dialog to specify the wanted yaw/pitch fov
• NB picts: open a dialog to specify the wanted yaw/pitch nb picts

Preset mode:

• Template: template defining all positions
• Templates information: informations on available templates

All modes:

• Left/Right Yaw arrows: move head on yaw axis
• Left/Right pitch arrows: move head on pitch axis
• Set origin: set the current position as origin (yaw=0.0°, pitch = 0.0°)
• Configuration...: open the config. dialog
• Shoot...: open the shooting dialog

Status bar

• Messages
• Manual speed
• Connexion status

Configuration dialog

Shooting tab

• Head orientation: orientation of the head
• Camera orientation: camera orientation on the head¹
• Stab. delay: delay to wait after the head has stopped, and before shooting, to let the head stablizing

¹: used by mosaic mode

Mosaic tab

• Overlap: minimum wanted overlap
• Start from: start position
• Initial direction: initial moving direction
• CR: if set, go back to the start of the row/columns before starting a new one

Camera tab

• Time value: shooting time (Tv camera value)
• Bracketing: number of picture to take at each position, and the intent of the bracketing
• Sensor coef.: ratio to 24x36 sensor size
• Sensor ratio: width/height sensor ratio
• Mirror lockup: if set, trigger an additionnal shutter sequence before each shot

Lens tab

• Lens type: type of the lens (rectilinear or fisheye)
• Lens focal: real focal of the lens

Hardware tab

• Driver: hardware driver to use ('bluetooth', 'serial', 'ethernet')
• BT device address: bluetooth device address for 'bluetooth' driver
• Choose...: open the bluetooth choose window
• Serial port: serial device port for 'serial' driver
• ethernet host: hostname/IP for the 'ethernet' driver
• ethernet port: port number of the 'ethernet' driver
• Auto-connect: if set, try to automatically connect to the head at startup

Misc tab

• Logger level: level of informations to log
• Data file format: format to use for the output data file name. The final name is papywizard_<format>.xml
  • %(date)s: expands to current date
  • %(time)s: expands to start shooting time
  • %(date_time)s: same as %(date)s_%(time)s
  • %(mode)s: expands to shooting mode (mosaic or preset)
• Data storage dir: set the directory where data file are written

buttons

• OK: validate settings and close dialog
• Cancel: revert to previous settings and close dialog

Bluetooth dialog

This dialog shows the list of availabe bluetooth devices, and a button to refresh the list.

Shoot dialog

displays

• shooting area: display the shooting position. Clicking on this area while pause set the next position to shoot
• progress bar: shooting process progression

buttons

• Rewind: while paused, rewind the next position to shoot
• Forward: while paused, forward the next position to shoot
• Manual shooting: if checked, automatically go to suspend mode at the end of each move, before shooting
• Data file enable: if checked, write a xml data file in the current directory (for APP). Also open the general info dialog
• Start: start shooting process
• Suspend/Resume: suspend/resume shooting process
• Stop: cancel shooting process
• Done: close shooting dialog

General info dialog

displays

• title entry: title of the shooting
• gps entry: location of teh shooting
• comment entry: comment about the shooting

buttons

• OK: validate infos and close dialog
• Cancel: revert to previous infos and close dialog

Log dialog

buttons

• Clear Log: clear the log window
• Save Log: save the log to file (in the data storage dir)

Keyboard shortcuts

Papywizard main target is Nokia Internet Tablets, so keyboard shortcuts are dedicated for that plateform (but works fine with normal PC). Here are defined shortcuts:

• In main window:

Nokia	PC	Function
	Right	Turn the head right (Yaw +)
	Left	Turn the head left (Yaw -)
	Up	Move the head up (Pitch +)
	Down	Move the head down (Pitch -)
	Home	Increase the manual speed
	End	Decrease the manual speed
	Return	Open shooting dialog

• In shooting dialog:

Nokia	PC	Function
	Right	Forward shooting position (while paused)
	Left	Rewind shooting position (while paused)
	Up	Rewind shooting position (while paused)
	Down	Forward shooting position (while paused)
	Return	Start/pause shooting
	Escape	Stop shooting - Return to main window

• In all dialogs:

Nokia	PC	Function
	F10	Show menu
	-	Standard maemo behaviour
	F6	Toggle fullscreen mode